5.4. Imposition mode
During the creation of a time programming, it will command for the imposition mode. Each
imposition mode has its own particularities:
Forced mode
:
On this
imposition mode the program will keep sending commands
continuously to every system connected to the SuperMaster. Once the time program is
finished, an
will be sent to every zone if programming is for set-point temperature
or a
will be sent if programming if for the operation mode (depending on the
programs configured and the automatic mode activated).
Semi-forced mode
:
This imposition mode is different according to the program
done, if on set-point temperature or on operation mode.
- For set-point temperature programs an
+ (Temperature
or
) each
hour. No check is done; it simply sets the temperature each hour.
- For operation mode programs, it first asks for the operation mode in each system,
and if it is a non-allowed one, it swaps to the correct one.
Free mode
:
On this imposition mode, the operation mode will be set only once to
or the programmed set-point temperature
on the starting time of the program
and a
or an
respectively at the end of the program.
5.5. Configuring a program
*Note: At any moment while configuring you can go back to previous step by pressing
icon.
To configure a program (Fig. 15) do as follows:
1)
From the main screen, press short on
icon.
2)
Press short on the icon to Access the programming menu.
3)
Use selection arrows
to select the type of program you are to configure set-point
temperature program (
) or operation mode program (
) and confirm with a short
press on the
icon. From this moment on, SuperMaster controller will display
for
set-point programming or
for operation mode programming.
4)
Use selection arrows
to select the day or group of days (they will be blinking).
Confirm selection with a short press on icon
.
Note: If the day or group of days has already a program configured, icon(s) will stay still on any selection.
For example, if on Monday (1) there is already a program configured, on individual day selection, it will stay
still instead of blink. For other selections like week days of whole week it will blink.
35
