3.4. Advanced configuration
The SuperMaster Controller allows you to define a number of parameters to adjust the
operation of this device to the installation requirements. To access to the configuration menu,
press and hold
from the user menu. Navigation within that menu is as follows:
Access or confirm.
Navigation within the different parameters.
Exit or return to the previous menu.
Return to the user menu.
Important:
Configuration parameters are common to ALL control groups.
3.4.1. Operation mode imposition setting
Manual mode allows you to impose the selected Air Conditioning mode in all the systems that
SuperMaster controls according to the imposition of the set up Mode.
This imposition can be done in three ways:
Forced Mode
:
The operation mode imposed is the whole time the mode indicated
by the SuperMaster Controller.
Semi-forced Mode
:
The operation mode imposed is the mode imposed by the
SuperMaster Controller also allowing the change to Stop and Ventilation locally in each
of the systems as it is indicated below:
SuperMaster Operation mode
selection
Local selectable operation mode
STOP
VENTILATION
AIR COOLING
RADIANT COOLING
COMBINED COOLING
AIR HEATING
RADIANT HETING
COMBINED HEATING
Free Mode
:
The mode imposed by the SuperMaster Controller is transmitted to all
the systems only once and at the moment of selection. Locally in each system any of the
other air-conditioning modes available can be selected later.
28
