background image

CE

All the products are in conformity with the following
European provision:
-Low voltage Directive
-Electomagnetic CompatibilitY

ROHS

 Your air conditioning product is marked with this

    symbol.This means that electrical and electronic
    products shall not be mixed with unsorted
    household waste.Do not try to dismantle the
    system yourself:the dismantling of the air

conditioning system,treatment of the refrigerant,of oil and of
other part must be done by a qualified installer in accordance
with relevant local and national legislation.Air conditioners
must be treated at a specialized treatment facility for reuse,
recycling and recovery.By ensuring this product is disposed
of correctly,you will help to prevent potential negative cons-
equences for the environment and humen health.Please
contact the installer or local authority for more information.
Battery must be removed from the remote controller and dis-
posed of separately in accordance with relevant local and
nationl legislation.

The products are fulfilled with the requirements in the
directive 2011/65/EU  of the European parliament and of
council on the Restriction of the use of Certain Hazardous
Substances in Electrical and Electronic Equipment(EU
RoHS Directive)

WEEE

In accordance with the directive 2012/19/EU of the European
parliament,herewith we inform the consumer about the dis-
posal requirements of the electrical and electronic products.

DISPOSAL REQUIREMENTS:

Contains fluorinated greenhouse gases

 covered by the Kyoto Protocol

This product contains fluorinated greenhouse gases covered
by the Kyoto Protocol.Do not vent into the atmosphere.
Refrigerant type:R410A
GWP

2088

:

 

GWP=global warming potential
Please fill in with indelible ink,

1      the factory refrigerant charge of the product
2      the additional refrigerant amount charged in the field

            and

 on the refrigerant charge label supplied with the product.

 

 The filled out label muset be adhered in the proximity of the

 

 product charging port(e.g.onto the inside of the stop value

 

 cover).
 A contains fluorinated greenhouse gases covered by the

 

 Kyoto Protocol
 B fatory refrigerant charge of the product:see unit name

 

 plate
 C additional refrigerant amount charged in the field
 D total refrigerant charge
 E outdoor unit
 F refrigerant cylinder and manifold for charging

A

B

C

D

kg

kg

kg

R410A

EUROPEAN REGULATIONS
CONFORMITY FOR THE MODELS

IMPORTANT INFORMATION REGA-
RDING THE REFRIGERANT USED

1+2  the total refrigerant charge

Содержание AW-YSDM048-H11





















Отзывы: