6. Make sure the winch is in the locked position and winch the aircraft
onto the tug platform - ensure the nose-wheel / cowling is aligned with the
tug.
7. Tighten the winch until the NFE-4 attachment is secured into the
backstop.
8a. Raise the ramp so it is an inch or two off the ground (
Close the valve
and pump the jack handle for “up” operation and open the valve to lower the
platform)
8b. Ensure the winch is still tight.
The tug is now ready to move the aircraft!
www.airtug.com
6
Valve & Jack Handles
