Assembly Instructions
Note:
It is recommended to have two people available for installing the handle to the frame. Following
that, it is easy for one person to complete the assembly in a short period of time.
In addition to the tug and the the handle, the following parts are included in the box with the
necessary fasteners:
1. one (1) Aircraft Nose-Wheel Attachment,
2. one (1) Handle “U” Bolt,
3. Zip Ties
Step 1: HANDLE
Slide the handle through the “U” bolt (take care
while sliding the wires through as well) (leave the nuts loose for
now to allow the handle to slide into the “U” bolt). Insert second U
bolt as shown
Tighten the “U” bolt nuts (4) securely under the tug frame (9/16”
socket).
Step 2: WIRING
The wires from the handle are designed to
only be attached the correct way:
The wires from the handle need to be connected to the following
wires:
a.
The Blue Bullet needs to be mated with the Bullet coming
from the brake on the transmission
www.airtug.com
3