1. Hold the NFE-4 Attachment so the tubes are on
the bottom and the sliding tube is on the right side.
Carefully, place around cowling.
2a. Line up the left side of the attachment first and
gently move attachment to the right so the left side is
fully engaged.
2b. Now push the right side moveable tube IN until it
clicks into place.
3. Gently lay the attachment on the ground.
4a. Position the NFE-4 Airtug® up to the the aircraft nose wheel with the
ramp centered on the wheel and stop.
4b. Lower the ramp onto white rollers. (
Close the valve and pump the jack
handle for “up” operation and open the valve to lower the platform)
5. Connect the winch hook to the NFE-4 Attachment.
www.airtug.com
5
ATTACHING THE NFE-6
TO THE AIRCRAFT
Sliding Tube
Sliding Tube Open
Sliding Tube Closed
Valve & Jack Handles
