AirTek PCMH45, Руководство по обслуживанию

Страница: 18 / 27

18
2.6 How To Change To New Motor Shroud
Open the top cap and take out the air flow direction part follow the procedure 2.2.1
Remove the PCBA box cover and wiring holder follow the procedure 2.2.2
Remove the PCBA follow the procedure 2.2.3
Remove the wiring connection between the PCBA and fan motor follow the procedure 2.3.1
Remove the water wheel follow the procedure 2.3.2
Remove the water reservoir follow the procedure 2.3.3
Remove the split pin & wheel gear of synchronous motor follow the procedure 2.3.4;
Remove the old motor shroud follow the procedure 2.3.5;
Remove the wiring holder & cable ties follow the procedure 2.3.6
Remove the fan blade & motor follow the procedure 2.3.8
2.6.1 Power switch holder/power switch/water inlet connector with water inlet tube/motor
capacitor/synchronized motor
Use screw driver to remove 1pc
SS screw with head (ST3*10) to
remove
the power switch
holder and then remove the
power switch.
Use screw driver to remove
2pcs SS screw with head
(ST4*8) to remove the water
inlet connector with water
inlet tube. Use screw driver to remove
1pc SS screw with head
(ST3*12) to remove the motor
capacitor.
Use screw driver to remove
2pcs SS screw with head
(ST4*8) to remove the
synchronized motor.
2.6.2 New Motor Shroud
Install the new motor shroud follow the above step.