Airtec RE-46, Руководство пользователя

Страница: 16 / 40

16
4.2 POWER cable
Standard sensor cables with 5-pin circular female connector, M12 thread, A-
coded

Straight or angled connectors can be used

Diameter of each conductor strand min. 0,25mm² (AWG 24)

Cables can be shielded or not shielded. A shield is not absolutely necessary but
improves the EMC performance of the valve terminal.

When using shielded cables, both sides of the shield should be grounded. Do
not forget to connect a grounding strap to the grounding screw of the valve ter-
minal.
ATTENTION:
Current load per copper strand:
max. 2.5 A @ 0,25mm² [AWG 24]
max. 3.4 A @ 0,34mm² [AWG 22]

IP protection code: IP65 or higher

Material of cable jacket: PUR or PVC. Resistant against environmental influ-
ences and chemicals (oil, detergents, temperatures, dust etc.)

For use in drag chains use special drag chain cables only. Consider the mini-
mum bending radius also.
Example of an M12 sensor cable (M12 female connector 5-pin and open wires)