New Master 35 Petrol/Gasoline Impact Wrench
Only qualified trained Fitters should attempt to service or repair this machine.
Your personal safety and those of your fellow workers is your responsibility.
Please observe all local and national regulations on safety. The undernoted list should be used as
a guide.
1.
Do not run or test any Two Stroke powered Machine in a Workshop or confined space.
This can lead to a build up of poisonous gases and it generates unnecessary noise.
2.
Empty fuel from the tank in a safe area before starting work on any Engine.
3.
If the Wrench has not been used for some time empty and clean the fuel tank.
4.
Under no circumstances smoke in a Workshop area.
5.
Keep work areas clean and free from old oil, fuel and dirty rags which could ignite.
6.
Do not leave fuel in open containers.
7.
Use safety cans for the storage of fuel and do not keep more than the permitted legal
quantity in any one place.
8.
After repair, test the Wrench using clean properly mixed fuel and do so in a well ventilated
area.
BASIC WORKSHOP SAFETY RULES GUIDE
SAFETY IS EVERYONE’S RESPONSIBILITY
THINK, ACT, BE SAFE
6
