
AirVelocity 1500 Installation Guide
DUG01560
Airspan Commercial and Internal Use
2
Warnings and Cautions
Human Exposure to Radio Frequencies
To comply with FCC RF exposure compliance requirements, the device should be located at a distance
of at least 20 cm (7.87 in.) from all persons during normal operation. The antennas used for this product
must not be co-located or operated in conjunction with any other antenna or transmitter.
Radio Interference
This AirVelocity 1500 generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio, television reception, which can be determined by
turning the equipment on and off, the technician is encouraged to try to correct the interference by
performing one or more of the following measures:
Re-orientate or relocate the unit
Increase separation between the units and/or End Devices
Connect the equipment to an outlet on a circuit different from that to which the power source is
connected
Modifications
Any changes and modifications to this device that are not expressly approved by Airspan Networks
may void the user's authority to operate the equipment.
General
Only qualified personnel should be allowed to install, replace, and service the equipment.
The device cannot be sold retail, to the general public or by mail order. It must be sold to
operators.
Installation must be controlled.
Installation must be performed by licensed professionals.
Installation requires special training. The AirVelocity 1500 should be installed ONLY by
experienced installation professionals who are familiar with local building and safety codes
and, wherever applicable, are licensed by the appropriate government regulatory authorities.
Failure to do so may void Airspan's product warranty and may expose the end user or the
service provider to legal and financial liabilities. Airspan and its resellers or distributors are not
liable for injury, damage or violation of regulations associated with the installation of outdoor
units or antennas.
Important Safety Instructions
Read and Save these instructions
This Installation Guide contains instructions and warnings that should be followed during
installation, and operation.
Failure to follow these instructions could cause bodily injury and/or product failure
Safety
1.
Read this guide and follow all operating and safety instructions.
2.
Keep all product information for future reference.
3.
No user serviceable parts inside.
4.
Position the power cord to avoid possible damage; do not overload circuits.
5.
Do not place this product on or near a direct heat source, and avoid placing objects on
the terminal.