AirSynergy 2000 Installation Guide
Page 45
Commercial in Confidence
UGD-D01001 Rev B
Figure 39 - gland and connector on cable
5.
Secure
the
prepared
ends
of
the
power
cable
into
the
head
part
of
the
connector
(male
part with
visible pins).
Figure 40 - secure cable to connector
6.
Insert and secure the
black
wire into position
1
and the
blue
wire into position
2
.
Figure 41 – power cable wires assembled
Note:
Individual connection numbers are marked on each part of the connector.
Figure 42 - numbered connector contacts
7.
Assemble the parts of the connector and tighten the gland to provide a waterproof seal.
Figure 43 - assemble and tighten
8.
Prepare the ends of the PSU
low voltage cable
and thread the connector parts over
the cable.
9.
Secure the prepared ends of the drop cable into the head part of the connector (female
part).
