AirHarmony-4000 DC (Integrated External Duplexers) Installation Guide
UGD-D01123
Airspan Commercial and Internal Use
3
Important Safety Instructions
Read and Save these instructions
This Installation Guide contains instructions and warnings that should be followed during
installation, and operation.
Failure to follow these instructions could cause bodily injury and/or product failure
Safety
1.
Read this guide and follow all operating and safety instructions.
2.
Keep all product information for future reference.
3.
Static sensitive components inside - do not remove the lid or base: No user serviceable
parts inside.
4.
Position the power cord to avoid possible damage, do not overload circuits.
5.
Do not place this product on or near a direct heat source, and avoid placing objects on
the terminal.
6.
To avoid electrical shock do not install this device during adverse conditions such as rain
or inclement weather.
7.
Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Disconnect the
power before cleaning.
8.
The units should not be located too near power lines or other electrical power circuits,
where it can come into contact with such power lines or circuits.
9.
The radio transceiver must be properly grounded to protect against power surges and
a u ulated stati ele t i it . It is the use ’s espo si ilit to i stall this de i e i
accordance with the local electrical codes.
10.
Installation of the AirHarmony-4000 DC INT EXT must be contracted to a professional
installer.
11.
The circuit breaker should be easily accessible in case you have to disconnect the device.
12.
When installed in the final configuration, the product must comply with the applicable
Safety Standards and regulatory requirements of the country in which it is installed. If
necessary, consult with the appropriate regulatory agencies and inspection authorities
to ensure compliance.
Warning of Hazardous Voltages
On AC installations, hazardous voltages exist. Use caution when verifying or working with AC power.
Remove metal jewelry that could come into contact with AC power.
On DC sections, short-circuiting the low voltage, low impedance circuits can cause severe arcing that
may result in burns or eye damage. Remove rings, watches etc. to avoid shorting DC circuits.
Note:
Airspan products do not contain hazardous substances (as defined in UK Control of
Substances Hazardous to Health Regulations 1989 and the Dangerous Substances Regulations
1990). At the end of any Airspan products life cycle, the customer should consult with Airspan to
ensure that the product is disposed of in conformance with the relevant regulatory requirements
.
