Airsmart Technology R801W-3DI, Руководство пользователя

Страница: 10 / 23

2
Listen to medium wave broadcasting
Press (Figure 2)
⑲
switch to be in medium wave band, and turn the knob
(Figure 2)
○
22
to listen to the radio programs within the range of
530-1610KHZ. This series of machine has high magnetic antenna. The AM
external antenna can also be used. Connect the two lines of the antenna to the
antenna clip, as shown in the figure below. Adjust the antenna to the best
direction, and then adjust the knob on the antenna (with external antenna for
tuning) to get the best signal. When the outdoor antenna is used, make
connection from (Figure 1)
①
, and adjust the direction of external antenna to
get the clearest radio broadcasting.
3
Listen to AM shortwave broadcasting
The shortwave shared FM antenna (using external telescopic antenna for best effect) is
used as same as FM. This machine has shortwave 1 and shortwave 2. Press the front
keyboard switch
⑱
to be in shortwave 1 , press the front keyboard switch
⑰
to be in
shortwave 2, and adjust the tuning knob
○
22
to find the desired radio broadcasting. In
shortwave 1, the radio programs within the range of 4.5-12MHZ can be received
(Figure 2). In shortwave 2, the radio programs within the range of 12-24MHZ can be
received. When the radio broadcasting is received, please turn the short or long distance
switch
④
on back of the machine to LONG-DISTANCE position. When the machine
is close to the station with strong signal, please turn the short or long distance switch to
the SHORT-RANGE position. Otherwise, it may cause overload . The (Figure 2)
"fine-tuning knob" may also be adjusted for fine-tuning in order to receive program in
the best state. The factory status is "remote".
Medium Wave antenna
connection diagram
Ground wire
Medium Wave antenna
Medium wave antenna
Medium Wave antenna
input diagram
Ground wire