8.3
Procedure for Installation
The installation is done in following steps:
Fastening of the device, if required
Connection at the compressed air network
Adjustment of diverting throttle, if required
Connection at the power supply
First time operation
Adjustment of switching point
Test and functional check
8.4
Mounting
If the device is to be operated in a portable manner or to be plugged to a standard coupling
as described below, no further mounting is required. In such a case, the lateral securing
collars can be removed.
In case of mounting on a machine, the device can be mounted on an even surface with the
help of enclosed mounting bracket. A drilling template is provided in the Appendix section of
these instructions.
