AirRaid Audio Relapse, Руководство по эксплуатации, Страница: 5 / 16

2. BAND ON / MUTE / SOLO / BYPASS
2.1.
Band On/O ff
— Toggles the band on or o ff . This only applies to the Lo and Hi
bands, as the Mid band is always active. If either the Hi or Lo bands are turned
o
ff , then Relapse functions as a dual-band e ff ect. If they are both switched o ff , it
acts as a single-band e ff ect.
2.2. Mute — Renders the band in question entirely silent.
Note: Mute is deactivated in Serial mode.
2.3.
Solo
— Renders both other bands silent, unless they also have their Solo button
turned on. This allows you to quickly audition the output of the soloed band.
Note: This control overrides the Mute control. If both buttons are switched on, the
Mute button ceases to have any e ff ect.
Note: Solo is deactivated in Serial mode.
2.4.
Bypass
— Completely bypasses the band's e ff ects mix controls, thus resulting in
a dry audio signal.
PAGE ! OF ! 4 15
2.1
2.3
2.2
2.4