the Hi band will be high-pass filtered at 2000 Hz, and the Mid band will be both
high-pass filtered at 500 Hz and low-pass filtered at 2000 Hz.
SERIAL — The crossover is deactivated and the individual bands are fed into
each other serially in the following order: Low -> Mid -> Hi.
PARALLEL — The audio input is copied across three identical bands running in
parallel. These audio bands are then passed through their respective delay and
FX modules before being summed.
9.2.
Global FB
— Routes all feedback (see 3.3 and 3.4) to the audio input, or in other
words, toggles between per-band and global feedback. This will have a
significantly di
ff
erent e
ff
ect depending on which routing configuration is selected
in 9.1. For example, setting
Routing
to
X-Over -> Delay
with
Global FB
switched
on will produce cross-band feedback, which will feed any high frequencies
generated by the Low band’s e
ff
ects (e.g., with the frequency shifter) back into
PAGE
!
OF
!
14
15
Содержание Relapse
Страница 1: ... OPERATION MANUAL 1 0 Updated 26 08 14 ...