AirRaid Audio Elements G-Filter, Руководство по эксплуатации

Страница: 6 / 6

Elements G-Delay
connecting the left and right CV input for that specific parameter to a different CV source
(such as the twin CV outputs of our Elements - DS-LFO device.) These parameters also allow
for monophonic CV modulation, which works if only the left CV input is connected (in much
the same way that connecting only the left audio input of a stereo pair gives you a
monophonic audio signal.)
The parameters that can be modulated monophonically via CV are:
Mix and Vol in the Global section, Amp, Attack and Release in the Envelope Follower section,
and Feed and Spray in the Delay section.
The parameters that can be modulated stereophonically via CV are:
Time, Grain Frequency and Pitch in the Delay section.
AUDIO I/O
Main — The audio inputs and outputs in the main section work exactly the same way as for
any stock Reason device.
Ext. FB Effects — These audio input and output pairs allow you to insert external devices
within G-Delay’s feedback loop. For example, connecting the audio outputs of this section to
the inputs of an RV-7000 Reverb device, and connecting the outputs of said Reverb device
to the inputs of this section will add a reverb effect to the feedback chain of the device.
AirRaid AUDIO
Page of 5 5