AirRaid Audio Elements G-Filter, Руководство по эксплуатации

Страница: 5 / 6

Elements G-Delay
Note: By “mono delay”, we do not mean that the outputted audio signal will be mono, as no
summing takes place, only that the delay times of the Left and the Right channels will be
identical.
Equal — Ensures that the Left and Right channels’ feedback times are equal, regardless of
each one’s individual settings. For example, a Left channel delay of 1/4 would logically decay
earlier than its 1/3 Right channel counterpart, which is not always desirable, and enabling
Equal resolves this.
HP — Controls the cutoff frequency of the high-pass filter that lies within G-Delay’s feedback
loop. Values range from 50 Hz to 20 kHz.
LP — Controls the cutoff frequency of the low-pass filter that lies within G-Delay’s feedback
loop. Values range from 50 Hz to 20 kHz.
GLOBAL
Mix — Controls the dry/wet mix of the device.
Vol — Controls the volume level of the device’s output, allowing you to either attenuate it or
boost it by up to 6 decibels.
Rear controls
CV MODULATION
As with most other devices in our Elements series, G-Delay offers two distinct types of CV
modulation depending on the parameter in question.
Some parameters allow for monophonic CV modulation, whereby the CV input modulates the
parameter for the left and right audio channel in an identical manner. Essentially, the CV
modulation for these parameters works exactly like it does for any stock Reason device.
Other parameters, however, allow for stereophonic CV modulation, whereby the left and right
audio channels can have the respective parameter modulated separately. This works by
AirRaid AUDIO
Page of 4 5