Page
4
of
5
ZIP
(FOR ACCESSING THE FLEXI PIPE)
AIR RELEASE FLAP
Fig
.
4
- There is a second flexi pipe inside the unit. It is located in the chamber underneath the mouth.
Its function is to direct the airflow from the bed into the top parts of the unit. Without this pipe,
the head of the crocodile wouldn’t inflate. Before inflating the unit, you must make sure this
flexi pipe is connected on both sides, and is fully functional.
You can verify them through the zip shown on the picture below.
- Switch on all fans to start inflation. Check around the Slide to make sure that it does not come
into contact with any obstructions.
- For the jaw to be able to drop, the fan must stop, and the air has to exit through the
“Air Release
Flaps
” seen on fig. 4. You can automate this movement of the jaw by connecting the supplied
electrical timer between the main electric socket and the electrical socket of the 2HP fan, which
will turn the fan ON and OFF in the selected time intervals.
2HP FAN SOCKET
ELECTRICAL SUPPLY SOCKET
BED
TOP PART
AIRFLOW
