Page
3
of
5
Fig. 2
Fig. 3
Please see below the anchor points of the unit:
Set up:
- After unfolding the unit please connect the fans as it is shown above:
a) the 2 HP fan to the mouth movement filler pipe
b)
the 1.5HP fan to the main filler pipe
- Please note the Mouth Movement filler pipe contains a flexible plastic pipe inside (fig. 1), that
directs the airflow directly from the fan into the chamber beneath the mouth. It is imperative to
tie the strap at the proximity of the bed (outside, fig 2.), and in the chamber beneath the
mouth (inside fig. 3) because these cam buckle webbing straps secures the flexi pipe, and
prevent it from moving.
16 GROUND ANCHOR POINTS IN TOTAL
FLEXIBLE PIPE INSIDE THE UNIT
2 HP FILLER PIPE
(FOR MOUTH MOVEMENT)
1.5HP MAIN
FILLER PIPE
Fig. 1
OUTSIDE STRAP
INSIDE STRAP
