Airplane Factory SLING 2
Pilot Operating Handbook
Page | 7-36
DC-POH-002-X-B-6
Revision : 2.6
7.22
Position, anti-collision, taxi and landing lights
The aircraft is equipped with a landing light and taxi light in each wing leading
edge. Each pair of landing lights is activated by a switch (labeled LAND) on
the instrument panel, likewise each pair of taxi lights is activated by a switch
(labeled TAXI) on the instrument panel.
Combination navigation / position lights (red, green and white) and anti-
collision lights (white) are fitted to the wing tips, in the standard
configuration (red left, green right). A combination position / anti-collision
light (white) is fitted on top of the rudder.
The white lights on the wingtips and rudder are dual function lights that can
either be on continuously (position light), flash (anti-collision / strobe light)
or flash at a higher brightness level superimposed on continuous operation
(i.e. combination position and anti-collision / strobe light).
Position and anti-collision light function is dependent on switch selection:
SWITCH
RED AND GREEN
WINGTIP LIGHTS
WHITE
WINGTIP
LIGHTS
WHITE LIGHT ON
RUDDER
NAV STROBE
ON
OFF
On
(continuous
illumination)
On
(continuous
illumination)
Off
OFF
ON
Off
On (flashing)
On (flashing)
ON
ON
On
(continuous
illumination)
On
(continuous
illumination) and
flashing
(with
higher
intensity)
superimposed on
continuous
illumination.
On
(continuous
illumination)
and
flashing
(with
higher
intensity)
superimposed on
continuous
illumination.