Airphx CID 75k, Руководство по установке пользователя

Страница: 8 / 27

8 | Page
5 Modes of Operation cont.
Standby Mode:
In standby mode, the CID 75k is powered on but both the
plasma chamber and the unit turbine are off.
Conditions that can cause the CID 75k to go into standby:
1. The filter has not been checked within 15 days of the Filter LED Indicator
illuminating red. At this point, the filter will need to be checked and changed
if dirty and the filter reset procedure must be performed. Please refer to the
section in this guide,
Filter Replacement and Reset Procedure for more
details.
2. The unit has been in operation for a year and it is time to replace the plasma
chamber. In this situation, the Service LED will illuminate red indicating it is
time to service the unit.
3. The CID 75k 7 Day Timer is enabled, and an off-schedule program is running.
4. The fault monitoring circuit has detected a fault with the CID 75k. In that
case, the Fault LED will illuminate red, and a fault message will be displayed
on the LED screen located on the front of the unit. Please refer to the
section in this guide,
Fault Indicator for more details.
In all conditions, the unit will resume operations once the condition is cleared.