AIRMATIC Syntron TAM, Инструкция по эксплуатации

Страница: 10 / 21

9
Using the mounting bolt(s), install the vibrator on the mounting plate (refer to Figure 4 , on pages 9 and
10). If the mounting plate is bent or warped due to welding, shim the opposite end of the vibrator (over--
shim slightly). Make sure that the vibrator is mounted tightly. After the first 10 to 15 minutes of
operation, retighten the bolts. Continue to check them periodically for tightness.
CAUTION: A loose vibrator can cause damage to the bin and the vibrator.
WARNING : Install a safety cable (larger models) to prevent the vibrator from falling
into the work area below if it should become loosened from its installation. The
safety cable must be long enough so that the action of the vibrator is not hindered.
VARIOUS VIBRATOR INSTALLATIONS
FIGURE 4