background image

1.    GENERAL INSTRUCTIONS

1.1   PURPOSE

 

  The product is intended for home/domestic use only and is not suitable for professional uses.

 

 Please refer to the maximum weight as per specification sheet. Overloading the trampoline above the    

 

 

  recommended user weight will cause damage which is not covered by the warranty

1.2   DANGER FOR CHILDREN

 

  Please ensure that children are supervised when using the trampoline. It is also important to make sure that all    

 

  appropriate safety precautions are undertaken. Also please be aware that the packaging material is not suitable 

 

  for use by children. There is a danger of suffocation.

 

  Trampolines over 51cm (20inches) in height are not recommended for children under 6 years of age. 

1.3   ATTENTION – PRODUCT DAMAGES

 

  Do not alter the product. Only use original spare parts and repairs should only be carried out by appropriately  

 

 

  qualified persons. Improper repairs can compromise the safety of your trampoline. Use this product only as  

 

 

  described in this manual.

 

  Protect the product against the effects of high humidity and high temperatures.

1.4     ADVICE FOR THE ASSEMBLY

 

 The assembly of the product must be done carefully by at least two able-bodied adults. If in any doubt, ask a  

 

 

  technically qualified person.

 

  Before commencing assembly of the trampoline, please read thoroughly the instructions contained in this manual  

 

  – it will save time and ensure that the completed trampoline complies with the design specifications.

 

  Remove all packaging materials and lay out all parts on a suitable surface. This will provide a good overview of all   

 

  components and simplify the assembly process.

 

  Cross check the unpacked parts with the parts list to ensure that there are no missing components. 

 

  Beware that when using tools or doing technical work, there is always a risk of injury so please make sure that  

 

 

  appropriate safety precautions are undertaken and assembly is undertaken in a careful and thoughtful manner. 

 

  As an example do not let tools lie around the workspace that could be tripped over or stood on.

 

  Dispose or place in storage packaging material in a way that cannot cause any danger. As noted above Foils and    

 

  plastic bags can be dangerous for children (danger of suffocation)!

 

  During the assembly process comply with all instructions in the Installation Guide making sure that no short cuts   

 

  are taken. Once assembled double check that all screws, bolts, washers and nuts are correctly installed and  

 

 

  tightened and that all joints are correctly fixed. The correct placement of washers is particularly important. Without  

 

  them, nuts and bolts can easy unwind when the trampoline is in use.

 

  A clearance space of at least 7.3m above the trampoline is most important In particular careful attention must be   

 

  paid to keeping the trampoline well clear of electrical and telephone cables as well as trees and other overhead    

   obstacles.

 

 Once assembled the trampoline must be checked that it is properly set up. In addition to keeping clear of overhead  

 

  obstacles it must be placed on a flat and firm footing and it is preferable that the legs are anchored to the ground   

 

  to prevent ground movement or lifting in windy conditions.

 

  It is also essential that the area surrounding the trampoline has good impact absorbing capacities. Either a  

 

 

  recommended play ground matting, grass, sand or a suitable alternative material. Under no circumstances should  

 

  the trampoline be located in an area where the immediate surrounding area is an unprotected hard surface.

 

  Do not attempt to set up the trampoline in rainy, windy or stormy conditions, especially during thunderstorms. 

 

  The metal frame of the trampoline will conduct electricity. Please ensure that it does not come into contact or  

 

 

  placed in close contact with any form of electrical circuit during construction. The same applies once it is in use. 

 

  Make sure that the trampoline is located well clear of other objects and is kept in a safe and secure environment. 

 

  When assembling or disassembling, please use gloves to protect your hands.

Содержание Aero bounce 120

























Отзывы: