8
User manual – Controller CP Touch
4.3
Symbols fixed on the main screen
Next to this symbol, outside air temperature
T-ODA is shown
If extraction / room temperature control is
used, interior temperature T-IDA is shown
(room or extraction air temperature)
If supply air temperature control is used,
supply air temperature T-SUP is shown
User interface access icon
Service settings accessible after entering
a password; any data in the service settings
may be edited only by an authorized service
technician.
Table 5
5
Blocks on the main screen
5.1
“Power” block
Figure 4
It shows the unit’s power level current at the time in % or m
3
/h according to the
configuration of the unit.
The current power level value may not correspond to the value set manually or in the
weekly program. If that is the case, the power level required is generated by a closed
input or a connected sensor such as that of CO
2
concentration.
