AirLive W6184QAX, Руководство пользователя

Страница: 33 / 46

To add a port to an IP address, click on Add Rule for the function you would like to
use. This can be for a single port or for a range of ports.
Single: Enter a Name or the rule you would like to make, Select TCP, UPD or
TCP&UPD, now enter the External port, the IP address for which the rule will be
made and then the Internal port. Click Add to add the rule after this click Save and
Apply to active the rule.
Range: Enter a Name or the rule you would like to make, Select TCP, UPD or
TCP&UPD, now enter the Start port and End port of the port range you like to use,
then enter the IP address for which the rule will be made. Click Add to add the rule
after this click Save and Apply to active the rule.
UPnP:
The Router UPnP function is used for the local area network and mobile devices,
which can use the network smoothly and accelerate the speed of P2P software
accessing the network. It is not recommended for ordinary users to turn on the UPnP
function of the router. After turning on the UPnP, the temperature of the router will
increase, and the life of the router will be reduced.