Airlink101 AR660W3G, Руководство пользователя

Страница: 48 / 76

49
Delete Selected If you want to delete a setting, check the ‘select’ box of the
setting you want to delete, then click ‘Delete Selected’ button.
(You can select more than one setting).
Delete All
If you want to delete all settings listed here, please click ‘Delete
All’ button.
Reset
You can also click ‘Reset’ button to unselect all.
After you finish with all settings, please click “Apply” button.
If you want to reset all settings in this page, please click “Cancel” button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures,
or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
3.3.2 Port Triggering
Some applications require multiple connections, such as Internet gaming, video conferencing,
Internet telephony and others. These applications cannot work when Network Address
Translation (NAT) is enabled. If you need to run applications that require multiple connections,
specify the port normally associated with an application in the “Trigger Port” field, select the
protocol type as TCP or UDP, then enter the public ports associated with the trigger port to open
them for inbound traffic. Note: The range of the Trigger port is 1 to 65535.