background image

15 

 

DSL  

 

For DSL users, your Internet type is either 

Dynamic IP

 or 

PPPoE

. If you are not sure which one 

you have, it is suggested to select 

PPPoE xDSL 

for your WAN type, and if you cannot connect 

to the Internet after the Setup Wizard finished, go through the Setup Wizard again and 

select 

Cable Modem

. Otherwise, you can call your ISP to confirm which Internet type you have. 

 

Option 1: PPPoE Settings 

Click on 

PPPoE xDSL

 for your WAN type. Enter your user name and password provided by 

your ISP. Click 

NEXT

 

 

 

Note:

 Depending on the ISP, you may need to include the domain name with your username. 

Example:          

[email protected]

 

 

 

Parameter 

   Description 

 

User Name

 

Please input user name assigned by your Internet service 
provider here.  

 
Password

 

Please input the password assigned by your Internet service 
provider here.  

 
Service Name

  

Please give a name to this Internet service (this is optional).  

 
MTU

 

Please input the MTU value of your network connection here. If 
you don’t know, you can use default value.  

 
Connection Type

  

Please select the connection type you wish to use. There are 3 
options:  

1) ‘Continuous’ - keep internet connection alive, do not 
disconnect,  

Содержание AR660W3G













































































Отзывы: