AIRLESSCO GS950, Операция - Ремонт - Запчасти

Страница: 15 / 36

Cleanup
3A4108F 15
5. Increase pressure to 1/2. Hold gun
against paint pail. Disengage trigger
lock. Trigger gun until flushing fluid
appears.
6. Move gun to waste pail, hold gun against
pail, trigger gun to thoroughly flush
system. Release trigger and engage
trigg
er lock.
7. Turn prime valve down to DRAIN position
and allow flushing fluid to circulate until
flushing fluid appears clear.
8. Turn prime valve forward to SPRAY
position. Trigger gun into flushing pail to
purge fluid from hose.
9. Raise siphon tube above flushing fluid
and run sprayer for 15 to 30 seconds to
drain fluid. Turn pump switch and engine
OFF.
10. Turn prime valve down DRAIN position.
11. Remove filters from gun and sprayer, if
installed. Clean and inspect. Install
filters.
12. If flushing with water, flush again with
mineral spirits, or Pump Life to leave a
protective coating to prevent freezing or
corrosion.
13. Wipe sprayer, hose and gun with a rag
soaked in water or mineral spirits.
ti29128a
1/2
ti29129a
ti29130a
ti29131a
ti29132a
ti29133a
ti29134a