3
1.
UNPACKING & SAFETY PRECAUTIONS
1.1
IMPORTANT SAFETY INSTRUCTIONS
1.
0845 300 2577
5.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY, IF THE ABOVE INSTRUCTIONS ARE NOT
FOLLOWED.
This instruction booklet is an integral part of the appliance and should be therefore carefully preserved
and always accompany the appliance, also in the event of transfer to another owner or user or another
installation. Should the booklet be damaged or lost, please request a copy for your technical assistance.
Note: You must follow the installation instructions before switching the air conditioning system on.
After having removed the packing, check that all the content is intact and complete.
In the event of non-compliance, contact your Retailer.
2.
his air conditioning system has been designed to be installed by the customer. Before drilling any
holes, make sure that there are no internal or external obstructions. If there are any concerns,
please call the customer help line
for assistance.
3.
These appliances have been designed to heat or cool the air of rooms and should only be used for
this purpose, in compatibility with their performance features. The manufacturer cannot be held
liable for damage caused to property or injury to persons or animals due to incorrect installation,
regulation and maintenance or improper use.
4.
This air conditioning system contain R407c refrigerant, when the equipment has come to the end if it
life span, the equipment must be disposed of in accordance with EU Law. Please seek advice if
required.
Transport & store the unit in an upright position only. Leave it in an upright position for at least 3
hours before first use.
6.
Do not switch on the unit before having totally assembled it and before having put it in its correct
operating position.
Ensure the unit is connected to an earthed power supply of the correct rating. (Refer to the rating
label located at the back of the unit).
DO NOT cover or obstruct the appliance's inlet and outlet grilles.
Your air conditioner has been designed to be used only in the home, office and similar conditions
and should not be used for any other purpose.
Never unplug the air conditioner while it is working, this could damage the electronic circuits.
ALWAYS use the remote control to start and stop the unit.
DO NOT use the appliance in a wet room, such as a bathroom or laundry room to avoid the risk of
electrical shocks.
DO NOT place articles on the appliance.
DO NOT operate the appliance with wet or damp hands.
DO NOT let chemical substances come into contact with the appliance.
DO NOT use the appliance in the presence of flammable substances or vapours such as alcohol,
insecticides, petrol, etc.
ALWAYS turn off the appliance when it is not in use and remove the mains plug from the power
socket outlet.
ALWAYS turn the unit off and remove the mains plug before cleaning, carrying out maintenance or
moving location.
Do not use adapter plugs, multiple sockets and /or extension leads.
Do not pull the electrical cable or place it near a source of heat: always unroll it completely to avoid
dangerous overheating. If the supply cord becomes damaged, the service agent or a similarly
qualified person must replace it, in order to avoid a hazard.
The filter must be used with the product at all times, when removing it for cleaning always turn the
unit off and unplug the mains plug from the socket.
Do not alter the safety or regulating devices without the permission and instructions of the air-
conditioner manufacturer.
Avoid prolonged direct contact with the direct flow of air and avoid the room being closed for a long
period of time.
Repair or maintenance works must be carried out by a service engineer or by qualified technicians in
compliance with the instructions given in this booklet. Do not alter the appliance, since hazardous
situations could be created and the manufacturer of the appliance will not be liable for any damage
or injury caused.
Do not access internal parts of the air conditioner without having putting the on/off switch to “off”
position.
CALL THE AIRFORCE HELP LINE FOR TECHNICAL ASSISTANCE 0845 300 2577
