Airflow DUPLEXVENT DV72 L, Инструкция по установке и руководство пользователя

Страница: 16 / 24

16
Commissioning
Setup guide for the Duplexvent
The commissioning
the remote switch.
panel is found on the Commissioning mode is chosen by pressing
the SET button for 4 seconds, all sensor
inputs will be disabled in this mode so that
they do not interfere with flow rates. All LEDs
will light with the Extract Boost flashing
(Ext B), this indicates that the flow rate may
now be increased/decreased as required.
The next press of the SET button will move
commissioning to the next setting, Sup.B
and so on. When the unit has been fully
commissioned, press the SET button for 4
seconds and this will put the unit back into
status mode. If the unit is not put back into
status mode after commissioning, it will
automatically revert back to status mode
after an hour.
Note: Settings will be retained if the power
supply is interrupted.
switched input ON
LED Indications
Constant LED Flashing LED
(A) Frost protection ON
(B) Boost state -
Humidity ON
(A) Service required
(C) Boost state -
(B) Service required
(D) Summer by-pass
ON
Supply and extract LED indications
Commissioning mode only