80001028
– Issue 1 10/21
5
1.7 Shipping
All manufactured devices are shipped from the factory after all tests and checks have been
carried out before shipment. The shipping must be carried out by trained and experienced
personnel and the necessary safety precautions should be taken to prevent the overturning
and slipping of the device. When shipping the devices, it should be ensured that the weight
is evenly distributed over the four corners and not unbalanced.
Packaging information and box weight information is displayed below:
Table 1: Packaging Information
Model
Packed Quantity
Box Dimensions (LxWxH) (mm)
Weight(Kg)
T1750
1
2360x810x780
240
T2200
1
2360x810x925
290
Warning:
When transporting the unit, carefully observe its behavior and
stay clear of any possible hazardous areas. It must be ensured that the
means of transport/lifting is suitable to accommodate the required weight
and size capacity. Never stand beneath suspended loads. Never try to lift
weight you cannot reasonably carry. Watch hands and fingers when lifting
or dropping the box to its side. Be careful in the transportation of the unit
that it is not dented in transit.
Figure 1: Packaging
