3
1 . 0
G e n e r a l I n f o r m a t i o n
To ensure complete and effective operation of the unit and for you and your own safety, all the following
instructions should be read carefully and observed. The relevant national standards, safety regulations and
instructions as well as the technical connection conditions of the energy supply company must be observed
and applied. Please ensure you have a document with the correct ventilation system calculations before
attempting the final install of the unit. Please keep the installation and operating instructions for reference.
The document must be issued to the operator (tenant/owner) after the final assembly.
1.1Important technical information
The unit may only be operated in a technically perfect condition, with the installer involved acting in a safe
and responsible manner, according to the intended use of the product. Issues arising from the unauthorised
tampering of the unit is not the responsibility of Airflow Developments.
1.2 Warranty and liability claims
To safeguard warranty and liability claims, the following information must be observed:
– Correct implementation according to the installation and operating instructions of the product.
– The use of accessories, or any other tools, implements or any other additions to the installation which are
not approved, recommended, or offered by Airflow Developments, is not permissible. Any damages are
excluded from the warranty. If these instructions are not observed, all warranty claims are excluded. This
also applies to any liability claims extended to the manufacturer.
1.3 Regulations – Guidelines
If the product is installed correctly and used to its intended purpose, it conforms to all applicable regulations
and guidelines at its date of manufacture.
1.4 Intended use
The unit is intended for the supply and extract ventilation of living spaces and buildings in combination with a
central ventilation system. The unit is not a ready-to-use product and it can only be operated once it has
been properly installed and connected to the ventilation system. The unit may only be installed in frost-free
rooms above +5 °C as standard. In case of operation under more difficult conditions, such as high humidity,
heavy contamination, excessive strain due to climatic, technical, and electronic influences consultation and
approval are required because the standard version is not suitable for this.
Any use other than the intended use is prohibited!
The conveying of solid matter or solid matter content
> 10 μm in air and liquid is not permitted. Transport media, which affect the fan materials, and abrasive
media are not permitted.
1.5 Scope of delivery
The delivery consists of one box containing the MultiPlexBox unit and the installation and operating
instructions
.
1.6 Shipping
The unit is packed ex works in such a way that it is protected against normal transport strain. Carry out the
shipping carefully. It is recommended to leave the unit in the original packaging until installation to prevent
any possible damage and contamination.
1.7 Receipt
The shipment must be checked for damage and consistency immediately upon delivery. If there is any
damage, promptly report the damage with the assistance of the transport company. If complaints are not
made within the agreed period, any claims could be lost.
WARNING:
Notes in a red box indicate warning and safety instructions. The red
border is a safety-relevant warning symbol. All safety regulations and/or symbols
must be absolutely adhered to, so that any dangerous situation is avoided.
