INSTALLATION INSTRUCTIONS AF200-007 - REV E
DATE 2/26/2015
Airfilm Camera Systems
Page
22
of
31
6245 Aerodrome Way Hangar No. 2
Georgetown, Ca 95634
Test Location
_________________________________
Airport or Test Site
5. Test Conditions
Date: ___________________
Weather: Ceiling ______________ Visibility ______________ Winds ________________
Altimeter ___________ Field Elevation _____________
Flight Time: Engine Start _____________ Shut Down _____________ Flt Time ______
6. Flight Test
6.1. Overview
Applicable regulations demonstrated for compliance are indicated with the following
symbol
. The testing required for the compliance findings of this installation will be made
by as a subject/qualitative evaluation. Although the most critical CG is considered to be at
the aft limit for most tests this configuration is mounted forward of the mast should not
approach the aft limits. This also depends on crew loading. The test team conducts the
following tests and evaluations and mark initial the box at the end of each section if the
configuration successfully passes the requirements.
6.2 FAR § 29.51 Takeoff
6.2.1 Applicable
Regulation
(a) The takeoff data required by Secs. 29.53, 29.55, 29.59, 29.60, 29.61, 29.62,
29.63, and 29.67 must be determined--
(1) At each weight, altitude, and temperature selected by the applicant; and
(2) With the operating engines within approved operating limitations.
(b) Takeoff data must--
(1) Be determined on a smooth, dry, hard surface; and
(2) Be corrected to assume a level takeoff surface.
(c) No takeoff made to determine the data required by this section may require
exceptional piloting skill or alertness, or exceptionally favorable conditions.
