NOTE: The fan weight is 17.92 lbs (8.13 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failing to do so can result in serious injury.
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION IN
SAVE ALL INSTRUCTIONS.
Installation Steps :
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
THE SAFETY
INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
PAGE: 5 / 9
Tighten the hanger bracket to the outlet box with two mounting screws.(
Make sure
the outlet box is securely installed so that it will be able to support at least the
fan weight.
) Attach the safety cable hook to the ceiling and make sure the safety
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE FOR
FAN SUPPORT"!
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box
Safety Cable Hook
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box
Hanger
Bracket
Outlet Box
Chip
Fig.3
Thread the motor wires through the
downrod stand cover, decorative
cap (Making sure the smooth side
of decorative cap is facing
downward.), canopy and downrod.
Collar
Remove the Lock Pin and take off
the Hanger Pin.
Motor Wires
Downrod
Downrod Stand
Cover
Canopy
Hanger Pin
Lock Pin
Fig.4
Decorative Cap
Loosen the collar screws out part way.
Insert the Downrod into the Collar.
Slide Hanger Pin through holes of
Collar and Downrod.
Downrod
Downrod Stand
Cover
Canopy
Decorative Cap
Hanger Pin
Collar
Tighten the two Collar Screws.
Slide Lock Pin into Hanger
Pin until it is locked into position.
Lock Pin
Collar Screws
Fig.1
Fig.2
Fig.5
Fig.6
Fig.7
cable hook is covered by the fan canopy.
F A N C O
200116
