PAGE: 5/8
Installation Steps :
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE
SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN
DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
NOTE: The fan weight is 24.2 lbs (10.9 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failure to do so can result in serious injury.
Fig.1
Turn OFF the electric power at the
main fuse or circuit breaker box.
Attach the hanger bracket to the outlet box with 2 mounting screws. (To reduce
the risk of fire, electric shock, or personal injury, mount to an outlet box marked
"Acceptable for fan support" and use mounting screws provided in assembly kit.)
Attach the "J" hook to the ceiling, and make sure the "J" hook on the outside of
the fan canopy.
Note: For slope ceiling installation, make sure that the chip of the hanger bracket
is toward the floor.
F A N C O
140819
Hanger Pin
Lock Pin
Remove the Lock Pin and take off
the Hanger Pin.
Fig.3
Insert the Downrod into the Collar.
Slide Hanger Pin through holes of
Collar and Downrod.
Insert and tighten the two Collar
Screws. Slide Lock Pin into Hanger
Pin until it locks into position.
Slot
Chip
Hanger Bracket
Fig.7
Fig.4
Fig.6
Lock Pin
Collar Screws
Slide canopy, canopy cover and
downrod stand cover onto downrod,
as shown; Then thread motor wires
through downrod.
Hang fan on hanger bracket, and rotate the downrod until the chip on
the hanger bracket snaps into the slot on the hanger ball.
Note: For slope ceiling installation, make sure the slot of hanger ball
and the chip of hanger bracket are toward the floor.
Fig.5
Hanger Pin
Motor Wires
Motor Wires
Collar
Downrod
Canopy
Canopy Cover
Downrod Stand
Cover
Fig.5.
Fig.2.
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Outlet Box
"J" Hook
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Outlet Box
