Aircraft POWERGLIDE, Руководство пользователя

Страница: 6 / 44

6
Let‘s Glide!
1. Ensure 2 x AAA batteries are fitted to the Handle, and that the main
Battery Pack is charged using the original Power Adaptor, and fitted.
2. Select your Pads: for general cleaning, we recommend using either
the pink or blue Pads. For the application of a wax or oil-based
solution on a wooden floor, or for a brilliant finish on high gloss floors,
please use the blue Pads.
Pads are self-attaching using Velcro, and may simply be applied onto
the two rotating discs, with the coloured side (pink or blue) facing the
floor.
Pads may be machine- or hand-washed as often as required. Additional or
replacement Pads are available from AirCraftVacuums.com.
3. Use the Top-up Cup to fill
POWERGLIDE
’ s tank (capacity is 300ml)
with water via the Water Inlet. You may also use a floor cleaning
solution. We recommend pre-mixing 5ml of cleaning solution per full
tank of water, to avoid any blockages of the nozzle.
You may also choose to spray floors directly with water, cleaning solution or liquid
wax before going over with your
POWERGLIDE
, using a spray bottle. Do not
dispense wax or polishing solution into the tank itself.
4. Press the Foot Switch on the base of your
POWERGLIDE
. The
white LED headlights on the base will illuminate.
If left idle for 10 minutes,
POWERGLIDE
will automatically enter Sleep mode. To
re-awaken, press on the Foot Switch twice.
4. Press the Start/Stop button on the handle to begin cleaning. The
green LED on the handle will flash briefly when a button is pressed.
5. Press the Spray button on the Handle to apply liquid to your floor
surface, sufficient to keep the Pads damp.
6. Guide
POWERGLIDE
by turning your wrist to easily steer to the left
and right, cleaning and buffing as you go. Spray and then hover over
any stains, to let the rotating Pads do the hard work. Simply guide
over the same area after spraying to dry and buff. Play Clean!