(10) Assemble the NLG and CLG bays.
(a) Drill holes in the side panels for the pins on the landing gear
legs and nose gear drag link.
(b) Assemble each of the two landing gear bays.
1
Drill holes in the side panels for the pins on the landing
gear legs and nose gear drag link.
2
Assemble the two landing gear bays. For each bay:
a
Assemble the two end panels and one side panel
to the roof panel. The end panels fit between the
side panels as shown in the sketch below.
NLG bay shown,
CLG bay similar.
b
Put the centre and nose landing gear legs and the
drag link in place, then attach the other side panel
to hold the legs in place.
(11) Centre engine duct assembly.
(a) Paint the visible interior faces of the three parts of the resin
intake duct. Do not paint bonding areas.
(b) Polish the bullet of the engine fan disc and attach it in the
short intake tube.
(c)
Assemble the three intake duct parts.
