manualshive.com logo in svg

AirClean systems PowderSafe AC730C, Руководство оператора

Поделиться
Скачать
AirClean systems PowderSafe AC730C Скачать руководство пользователя страница 16

16

Pre-filters

Pre-filters should be checked each month. In most cases, they should be changed every 

1 to 3 months. Prefilter replacement is required when discoloration of the prefilter occurs 

or when the low airflow alarm comes on. See the “PRE-FILTER CHECK/REPLACEMENT” 

section of this manual for complete instructions.  

 

PRE-FILTER CHECK / REPLACEMENT

A.  To check the Pre-filter:

1.  Look through the sash to the inside of your unit. The pre-filter and pre-filter grid are located at the 

back of the unit.

2.  Look through the slats on the pre-filter grid. If the prefilter is discolored (the original color is 

green), replacement is needed.

B.  To replace the Pre-filter:

1.  Don the proper PPE for handling the substance that have been used inside the enclosure (refer to 

the MSDS sheets).  

2.  Turn the unit on and make sure that the blower is running.

3.  Place an appropriate poly bag on the base of the enclosure. You will place the saturated pre-filter 

inside the bag and seal it before removing it from the hood.

MAINTENANCE

Figure 7. AC740C Pre-filter grid.

Содержание PowderSafe AC730C

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды