C a l l o u t m e s s a g i n g
Callout acknowledgement sending not successful
If sending a callout acknowledgement does not succeed, sending continues
as a background process, and
is shown.
The callout mode ends, and the callout message is shown on the display until
you press
. The acknowledged callout message is saved as a read
message
, and the acknowledgement is saved as a pending
acknowledgement
with the buffering time to the
folder.
If sending a buffered callout acknowledgement succeeds, the confirmation
text
is shown. The acknowledgement is saved
to the
folder with the sending time, and it replaces the
pending message.
If sending a callout acknowledgement does not succeed directly or after re-
sending,
User acknowledgement sending failed
is shown. The buffered
acknowledgement is changed into a failed callout acknowledgement
in
the
folder, and the time information is not changed.
If sending a callout acknowledgement is not possible at all (e.g. when the
transmission barring is active), the acknowledgement is not saved.
If the pager is switched off for some reason when it is trying to send a
buffered acknowledgement, re-sending stops. When the pager is switch on,
a buffered acknowledgement is changed into a failed callout
acknowledgement
in the
need to acknowledge the callout messages again.
Callout messages not requiring an acknowledgement
If the callout message does not require your response, the upper and lower
selection key options are
and
in the callout mode. The
option list has only one item
for changing the font size.
If you press
, the callout mode ends and the message is
saved to the
folder as a read message
. The callout
message is shown on the display until you close the message with
. If
, the callout message is shown on the display, and the
callout mode continues.
P8GR_en_print.book Page 33 Thursday, November 12, 2020 6:57 PM