4/8
09/2017
IH - PS11441BMLAE01
Copyright
®
2015 - 2017 Airbus DS SLC. All rights reserved.
EN
Car Kit CARK-10 - Installation Guide
Component Parts
Advanced Active Holder MCR-6
The holder for the radio is attached to the vehicle’s interior in a convenient position using
the swivel mount HHS-15. The mounting is secured with a screw (included with HHS-15).
The screw recess is covered with the rubber plate.
The cable with the plug-in connector from MCR-6 connects to the
PHONE
socket in HFU-
2T. (The other 2 cables from MCR-6 connect to external antennas.)
Swivel Mount HHS-15 and Mounting Plate MKU-1
HHS-15 is a swivel mount which allows for adjustable fixing. MKU-1 is a fixed position
mounting plate.
Advanced HF Unit HFU-2T
The handsfree unit HFU-2T is attached to the vehicle interior using the mounting plate
MKU-1. The mounting is secured with a screw (included with MKU-1).
Power Cable PCH-4J
The power cable connects to the
DC
socket in HFU-2T and to the vehicle’s power supply.
See the ”Installation” section for more information.
The HF microphone connects to the
MIC
socket in HFU-2T. Push the plug to lock it firmly
in place.
HF Speaker HFS-12
The HF speaker connects to the
SPEAKER
socket in HFU-2T. Push the plug to lock it
firmly in place.
Adapter Cable DTC-1
The DTC-1 adapter cable connects to the HFU-2T DATA/HANDSET socket. It provides
for the possibility of connecting to two out of three possible accessories: PTT-1, HSU-1T
and DLR-3T. It comprises specified sockets for DATA and HANDSET connection.
Note that if only one of these three accessories is used, it must be connected directly to
the HFU-2T without using the DTC-1!
External Push to Talk Key PTT-1
The external push to talk key is to be used during a one-way call. The key connects
directly to the HFU-2T DATA/HANDSET socket or to either socket in the DTC-1 Adapter
cable (please refer to DTC-1).
Note that the external push to talk key is not allowed to be installed to a vehicle control
device!
Data Adapter Cable DLR-3T (not supplied)
The data adapter cable enables RS232 data connection to the radio. The cable connects
directly to the HFU-2T DATA/HANDSET socket or to the DTC-1 adapter cable DATA
socket (please refer to DTC-1). For more information, please refer to the user guide for
the data adapter cable.
External Mobile Antenna (not supplied)
An external TETRA-band antenna is recommended for the car kit. It connects to MCR-6.
print.book Page 4 Jeudi, 28. septembre 2017 10:57 10