©
A
ir
B
orne
W
ind
S
ports
P
ty.
L
td.
SECTION 4
Aircraft Operating Instructions Edge XT 582 / Cruze
NORMAL PROCEDURES
May 2007
Issue 2.0
Page 29
4.12.13
Fold Leading Edges
Fold both wings in symmetrically, bringing both
leading edges back at the same time or in small
steps side to side.
Roll the sail inwards parallel to the leading edge.
Attach a strap around one wing. Repeat for the
other side. Fit the keel end pouch.
Figure 35 Section 4. Fold Leading Edges
4.12.14
Attach Straps
Once the leading edges are together apply slight pressure downwards on the keel to raise the leading
edges above the down tubes and attach strap around both wings and keel. Attach remaining straps so
that they are evenly spaced.
4.12.15
Fit Wing Bag
Position the wing bag to the nose of the wing. Stretch bag down the wing to enclose the tips.
4.12.16 Roll Wing
Hold the wing and down tube and roll the wing onto its back with the control frame to the side.
4.12.17
Disconnect Base Bar
Depress pip pin button and remove pip pin from base
bar. Fold down tubes together with base bar folded out.
Re-insert the pip pin.
Figure 36 Section 4. Disconnect Base Bar
4.12.18 Fit Padding
Fit the base bar and down tube covers. Velcro the base bar cover
in whilst holding the base bar in position.
Figure 37 Section 4. Fit Padding