background image

EN

Lift up the upper part of the
main frame and place it 
sidewise.

Remove the insulation for 
shock absorption in the 
lower part of the internal 
disk. (When using for the 
first time).

After removing the packing
and the vinyl of the 
disinfectant device (BSS) 
place it into the floor of the
cistern's insert part until 
you hear a “click” sound.

Make the side with sticker 
to see the front.

The product will not 
operate if the front and 
back of the tank are 
changed.

      

   

                                          Maximum

Fill the water no more than water 
level (1) marked on both sides of 
the tank. When using underground 
water, scale (lime) could form on 
the surface of the disk, cistern and 
the disinfectant device so please 
use tap water.

Return the upper part of the main 
frame to its original position. 
Install the cistern and the control 
switch in the front side.

If the direction is wrong, spacing 
occurs in between the upper part of
the main body and the cistern so 
operations is not possible.

Please insert the connector to the 
product first and then insert the 
plug to the wall socket.

When disconnecting the power 
cord, please pull out the plug from 
the wall socket first and then 
separate the connector from the 
product.

 3.4  Power on/off and operation

Button 1: Switch on/off device

Start/Stop: you can [Power] or [Stop] when you press the power button on left.

Button 2: Choose working modes

1) Auto : It controls its mode between super-strong-weak according to the humidity around. It stops 
operating if the humidity exceeds 60% and restarts if humidity becomes less than 60%.
※If humidity exceeds 60%, the humidifier stops but the airwasher operation continues so that the fan keeps 
operating with weak mode.

2) Super-wind Operation : It operates with its maximal mode regardless of the humidity around. Used to 
airwash and humidify the size equivalent to living room.

3) Strong-wind Operation : It operates with the strong-wind mode regardless of the humidity around. Used to
airwash and humidify the size equivalent to inner room(big room).

4) Weak-wind Operation : It operates with the weak-wind mode regardless of the humidity around. Used to 

Page 9 of 17

Содержание AIRWASHER


















Отзывы: