AIR2G2 AIR2G2-336, Руководство владельца/оператора, Страница: 12 / 63

1 2
BEFORE LEAVING THE MACHINE : Always stop the machine on level ground. Shut OFF the engine and turn OFF the
PLC before leaving the machine for any reason. The beam must be in the UP (HOME) position and the safety chains
are secured on each side.
The cylinder rods should be in the UP (home) position with the aluminum clamps hand tightened with supplied T
wrench.
When the machine is in a neutral position THE BRAKE WILL BE ENGAGED unless the handle bars are in a forward
position away from operator position (to move away from operator) or the handle bars are pulled back towards the
operator position (to move towards operator). NEVER APPLY PRESSURE TO THE HANDLE BARS IN AN
ATTEMPT TO MOVE THE MACHINE WHEN IN A NEUTRAL POSITION. DAMAGE MAY OCCUR TO THE
CABLE OR TO THE CABLE CONNECTIONS.
• If an object below the surface is struck,
stop the machine, turn the engine OFF, and the PLC to the OFF position
and inspect the probes (see SAFE OPERATION OF MACHINE & PRE-OPERATION OF THE MACHINE).
•
Keep hands and feet away from the probes and Pad Assemblies.