Air Weigh LoadMax, Руководство по эксплуатации

Страница: 21 / 32

21
When either DATA STREAM or OBM STREAM is selected, menu
changes occur. In the first level menu screen, PRINT, SETUP will change
to SETUP. The second level PRINT MENU screen is no longer an option
choice.
MORE OPTIONS
Provides access to CAN bus options and inclinometer control.
CAN PROTOCOL
Used to change the databus protocol between J1939 (the default) and
CANopen. Consult Air-Weigh Customer Support before changing CAN
PROTOCOL. You must cycle power each time this selection is changed.
INCLINOMETR
Used to control an external inclinometer. Refer to Product Application
Note Air-Weigh LoadMaxx / Inclinometer Option, P/N 901-0104-001, and
consult Air-Weigh Support for more information on this subject.
SHOW / HIDE MENU
SHOW GVW
Causes the GVW / Net screen to be visible or not, depending on whether
there is an Air-Weigh Trailer Scale present. SHOW GVW lets the GVW /
Net screen be visible even without a trailer. HIDE GVW requires an Air-
Weigh Trailer Scale or direct connect trailer suspension sensor to be
present in order to access the GVW / Net screen.
SHOW STEER
SHOW STEER causes the Steer Axle to be visible on the first Weights
Display. HIDE STEER removes the Steer Axle from the first Weights
Display, and also prevents access to the GVW / Net screen. SHOW /
HIDE STEER is changed automatically with some changes in the Scale
Type (see under SYS CONFIG subsection, above). For example, a 5800
model number is identical with a 5803 model number, except that a 5800
has SHOW STEER and a 5803 defaults to HIDE STEER.
SHOW HELP
See the Section IV.B, How-To-Weigh Instructions, above.
DIAGNOSTICS MENU
SYSTM STATUS
Use this menu to obtain
the Scale Display’s system status, including
weight units (Lbs or Kgs), error status,
the Scale Display’s software
version numbers and its serial number, and inclinometer diagnostics. Use
the up/down arrows <

> to scroll between the three SYSTEM STATUS
displays, which together show this information.