6
READ THIS BEFORE
YOU USE YOUR VISTACAM OMNI ic 4
n
The OPERATION section of this manual covers three installation scenarios:
1. Cart, Counter-Top or Wall-Mount System
2. Multi-Operatory Installation w/o interoperatory wiring
3. Multi-Operatory Network with QDA (Queuing Distribution Amplifier)
n
For all installation scenarios, follow these steps:
1. See PRE-INSTALLATION CHECK and INSTALLATION SCHEMATICS to make
sure your system is installed correctly.
2. Review 1. POWER ON and 2. HANDPIECE.
3. See 3. - 6. to capture and print an image.
For more detailed information about VistaCam Omni ic 4 system components, see the
Major Components section of this manual.
IMPORTANT
For VISTACAM OMNI ic 4 users
The VistaCam Omni ic 4 camera design incorporates a battery pack with a
two hour capacity to “hold” a captured image in memory when the camera is
detached from the Docking Station
.
When using the VistaCam Omni ic 4 for the
first time turn on the power to the VistaCam Omni ic 4 and leave on a
minimum of 12 hours to make sure the battery is fully charged
.
When the camera is attached to the Docking Station and the AC power is on,
the battery is constantly recharging.
