Air Techniques J1100, Инструкция по установке и эксплуатации

Страница: 17 / 64

Page 17 Air Techniques, Inc.
PRODUCT DESCRIPTION
4.4 Model identification plate
The model identification plate is located on the back cover of the unit.
Conformity assessment
This device has been subjected to conformity acceptance testing in accordance with the current relevant
European Union guidelines. This equipment conforms to all relevant requirements.
UL approval
This Class A digital apparatus complies with IEC 60601-1 Edition 3.1 (2012) / EN 60601-1:2006 +
A1:2013 + A12:2014, IEC 60601-1-2, 3
RD
edition (see Appendix B) and IEC 60601-1-2, 4
th
edition.
FCC
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
Part 15 of the FCC rules.
FCC Part 15 Subpart C, Section 15.225/IC RSS-210 Radiated Spurious and Bandedge, EN 300 330.
IEEE C95.1- MPE Calculation - ANSI C95.1-RSS-102 EN 301 489-1/EN 301 489-17
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of these equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own
expense.
FDA
Complies with FDA performance standards for laser products except for deviations pursuant to Laser
Notice No. 50, date (June 24,2007).
REF Order number
SN
Serial number