Air Techniques Acadia Plus, Инструкция по эксплуатации

Страница: 8 / 17

Air Techniques, Inc. Page 8
Input/Output Connector Orientation Option
Although the Separator is shipped with the input and output ports facing to the right, the design allows the entire
assembly to be rotated 180
°
so the connection ports face to the left side for installation flexibility. Refer to Figure 5
and perform the following steps to change the connector port orientation as necessary .
Note: Make sure to save all removed screws . They are reused during installation .
1 . Remove the 4 screws securing the separator assembly to the chassis/mounting bracket .
2 . Rotate the separator assembly 180
° and remount onto the chassis/mounting bracket and secure with the 4
screws removed in step 1 .
Figure 5 . Changing the
Acadia Plus
Amalgam Separator Connection Port Orientation
Removing the Separator Assembly from
the Chassis/Mounting Bracket
Rotating the Separator and Installing
to the Chassis/Mounting Bracket
for Left-side Connection Ports
4
2
1
3
3
4
1
2
INSTALLATION INFORMATION