Air Techniques Acadia Plus, Инструкция по эксплуатации

Страница: 3 / 17

Page 3 Air Techniques, Inc.
Figure 1 . Acadia Plus Amalgam Separator Assembly
This manual covers the installation and maintenance of the Acadia Plus Amalgam Separator Assembly, P/N APLUS .
Installation tasks include the following:

Adding to any existing liquid ring or dry vacuum system .

Installing as part of a new liquid ring or dry vacuum system .
This manual provides additional maintenance and troubleshooting information, as well as instructions to replace a
filled Collection Container . The
Acadia Plus
Amalgam Separator is hereafter referred to as the Separator in this
manual . Make sure to review and follow the information specific to your installation to ensure that the Separator
provides the highest level of safe service .
The Separator is designed to meet ISO 11143 requirements in the removal of amalgam from a dental suction
system's wastewater stream . Installed between dental operatories and vacuum pumps, the Separator uses
continuous separation of solids from liquids and gases through a sedimentation process where high-density
particles (Amalgam) fall from suspension in the wastewater stream . The Separator has been independently
tested and certified to be in compliance with ISO 11143 .
Features include:

Capable of processing effluent for up to ten (10) simultaneous users.

Meets the ISO 11143 standard .

Continuous separation of liquids and solids from gases .

Minimal maintenance required .

Collection Container
• Easily removed using a quarter turn and pull .
• Transparent housing enables user monitoring of capacity and when to replace container .

Mounting & Connections
• Multiple mounting configurations (Wall Mount, Floor Mount or Stack Rack Mount on Mini or XL).
• Quick and easy installation using included fittings.
INTRODUCTION
CHASSIS MOUNTING
BRACKET
COLLECTION CONTAINER
OUTPUT
CONNECTOR
(vacuum system)
INPUT
CONNECTOR
(from operatories)