Troubleshooting Guide
nano Induct Specifications
Problem/Question
Solution/Answer
What if my NIND won’t turn
on? The indicator lights are
not illuminated.
Check to make sure the power adapter is firmly plugged
into the electrical outlet and the NIND.
The Lamp Status indicator
light has turned from green
to red.
Reset the unit by unplugging it for the power source.
Check to make sure the four pins on the AHPCO
®
Cell
are fully inserted into the Ballast Assembly. Reconnect the
power. If the indicator light is still red contact Air Oasis or
an authorized dealer.
The Lamp Replacement indi-
cator light is blinking.
This is an indication that it has been two years since the
AHPCO
®
Cell has been replaced. Contact an Air Oasis
authorized dealer to purchase a new AHPCO
®
Cell.
If the above does not repair the symptom please contact an Air Oasis Customer Service
Representative:
Phone: 1-800-936-1764
E-mail: [email protected] Web: www.airoasis.com
Mail: Air Oasis
Customer Service
3401 Airway Blvd..
Amarillo, TX 79118
Operational
NIND6 Coverage
NIND9 Coverage
NIND14 Coverage
Warranty
Up to 3 tons (1200 CFM)
Up to 4 to 6 tons (1600 - 2400 CFM)
Up to 7+ tons (4800+ CFM)
Two year limited warranty
Replacements
NINDAHPCO 6, 9, or 14
Replace every two years.
Electrical
NIND6 Usage
NIND9 Usage
NIND14 Usage
24 VAC/26VDC, 0.40 Amps, 11 Watts
24 VAC/26VDC, 0.50 Amps, 13 Watts
24 VAC/26VDC, 0.68 Amps, 18 Watts
Mechanical
NIND6 Dimensions
Weight of Unit
Shipping Weight
NIND9 Dimensions
Weight of Unit
Shipping Weight
NIND14 Dimensions
Weight of Unit
Shipping Weight
4” L x 4” W x 8.1” H
1 lbs
4 lbs
4” L x 4” W x 10.7” H
1 lbs
5 lbs
4” L x 4” W x 15.8” H
1.4 lbs
5 lbs
Copyright© 2015 Air Oasis LLP. All Rights Reserved.
